Programming key fobs
#1
01-13-2006 | 12:06 AM
Thread Starter
|
Junior Member
Joined: Jan 2006
Posts: 2
From: United States
I had to purchase 2 new(from Ebay) remotes for my 1997 Park
Avenue. They are the correct remotes for the car. I
received programming instructions with them but in the connector under
the dash, there is no wire in hole #8.(it says to jump pin 4 and pin
8) Were these the correct instructions or is there another way?
Avenue. They are the correct remotes for the car. I
received programming instructions with them but in the connector under
the dash, there is no wire in hole #8.(it says to jump pin 4 and pin
8) Were these the correct instructions or is there another way?
Thread
Thread Starter
Forum
Replies
Last Post
tallboi
LeSabre
1
08-20-2017 09:45 AM